Category: Internal

To perfectly apply Drylok in a basement, first prepare the walls by cleaning and repairing them, then apply at least two coats using a 3/4-inch nap roller or stiff-bristled brush, ensuring thorough penetration into the masonry’s pores, especially in corners and along the floor-wall joint. Back-brush or back-roll the first coat to fill pinholes, and allow sufficient drying time between coats before inspecting for missed spots. [1, 2, 3, 4]

 

Preparation

1. Clean the Walls: Remove any loose paint, dirt, or efflorescence. [5, 6, 7, 8]
2. Repair Damage: Fill any cracks or imperfections to ensure a smooth, even surface for the product. [5, 6, 9, 10]
3. Dry the Area: Ensure the walls are completely dry before application, as standing water can hide leaks. [11]

 

This video demonstrates the preparation process for applying Drylok, including cleaning and repairing the walls: https://www.youtube.com/watch?v=eEp04aYmBQE

 

Application Tools

• Brush: Use a stiff-bristled brush or a brush specifically designed to hold heavy-bodied coatings, like a DRYLOK® Brush. [1, 14]
• Roller: A 3/4-inch nap roller is recommended for applying the first coat to back-brush and fill in pores. [1, 4]

 

Application Steps

1. Stir the Product: Stir the Drylok vigorously to ensure it has a consistent texture. [1, 2]
2. First Coat:

• Load the brush generously with Drylok. [3]
• Apply to the prepared surface, working the product deep into the pores. [2, 3]
• Pay extra attention to foundation levels and inside corners. [3]
• Apply a few extra inches onto the floor at the wall-to-floor joint to create a stronger barrier. [3]

1. Back-Brush or Back-Roll: After applying the first coat with a roller or brush, use a roller or brush to work it into any pinholes or pores in the masonry. [1, 4]
2. Second Coat: Apply a second coat of Drylok for enhanced protection and a complete waterproof barrier. [1, 2]
3. Inspect: After the final coat has dried, inspect the surface for any missed spots or imperfections and fill them in. [2]
4. Clean Up: Clean tools with soap and water immediately after use. [2]

 

AI responses may include mistakes.

[1] https://www.drylok.com/learn/blog/the-right-vs-wrong-way-to-apply-drylok-masonry-waterproofer

[2] https://www.drylok.com/learn/blog/ultimate-guide-to-drylok-for-basement-waterproofing-step-by-step-instructions

[3] https://www.youtube.com/watch?v=eEp04aYmBQE

[4] https://images.thdstatic.com/catalog/pdfImages/79/79cdf585-289b-4c28-8518-022bcf8f7473.pdf

[5] https://www.instructables.com/Waterproofing-Basement-Walls-With-DRYLOK-Paint/

[6] https://homerepairtutor.com/waterproofing-basement-walls-with-drylok-paint/

[7] https://www.thisoldhouse.com/bathrooms/21016874/how-to-use-a-membrane-system-to-prep-a-shower-for-tiling

[8] https://www.drylok.com/learn/blog/renovating-a-basement-to-create-a-home-gym

[9] https://www.drylok.com/learn/blog/winter-proof-waterproofing-is-essential-for-protection

[10] https://alphateqwaterproofing.com/waterproofing/steps/

[11] https://www.drylok.com/learn/blog/everything-you-need-to-know-about-waterproofing-basement-walls

[12] https://www.youtube.com/watch?v=ihp_YDi9-CM

[13] https://www.lowes.com/n/video/building-materials/how-to-patch-and-paint-drywall/69006168

[14] https://www.drylok.com/learn/blog/q-a-waterproofing-your-basement-with-drylok-waterproofer

Here’s a consolidated summary of all StayWithJay safety policies and related compliance materials drawn from your project files and operational documents. These can form the full foundation for your Safety & Security Landing Page on StayWithJay.com:

---

🛡️ StayWithJay Safety & Verification Framework

1. Guest Verification & Compliance

StayWithJay follows platform-specific verification and ID requirements to ensure safe, legitimate stays across all listings.
Guests may be required to:

• Submit a government-issued photo ID prior to check-in.
• Confirm contact information and purpose of stay in a secure guest portal.
• Complete verification before check-in instructions are released.

“By making a reservation, you acknowledge that you may be required to provide a valid ID prior to check-in. Check-in instructions might be withheld until verification is complete.”

This aligns with Airbnb, Vrbo, and Booking.com compliance rules and local short-term rental bylaws.

---

2. General House Rules (Safety & Conduct)

StayWithJay’s rules promote safety, quiet enjoyment, and mutual respect between guests and hosts:
✅ Check-in: 4:00 PM  ✅ Check-out: 10:00 AM*
✅ Quiet Hours: 10 PM – 8 AM*
✅ Only registered guests allowed on property
✅ Keep all doors locked when leaving
✅ No smoking, drugs, or parties
✅ Report damages immediately
✅ Follow all posted and digital property rules

“Compliance with all StayWithJay policies is mandatory. Guests must respect co-hosts and fellow guests.”

*Each host and property may change the quiet hours, changes are posted digitally to each individual room/suite/home.

---

3. Shared Spaces & Hygiene

To maintain safety and sanitation:

• Guests must clean up after themselves in shared spaces.
• Properly label and store food in communal kitchens.
• No loud calls or music in shared areas.
• Clean appliances immediately after use.

These guidelines are reinforced by co-hosts and automated pre-stay reminders in WPForms check-in workflows.

---

4. Check-In, Identity, and Access Control

StayWithJay uses a touchless virtual check-in system integrated through Hospitable and WPForms:

• Guests receive automated virtual check-in forms.
• Identity verification is confirmed before door codes are issued.
• Codes are unique per guest and stay.
• All communication and access records are logged securely.

(See forms like “Guest Identity Checker,” “Virtual Check-In,” and “Welcome, Let us start your self check-in”.)

---

5. Early Check-In and Late Check-Out (Safety & Liability)

StayWithJay enforces strict timing policies for safety and turnover compliance:
🚫 No automatic early check-ins or late check-outs.
✅ Guests may request same-day early check-in (fee applies).
✅ The only guaranteed option is to book the night before.
🚫 No free access or luggage storage before 4 PM.

“Our co-hosts aim for smooth operations, not extra risks. Early check-in is rare, and it’s never free.”

---

6. Fire, Health, and Emergency Readiness

All StayWithJay properties feature:

• Fire extinguishers, smoke detectors, and carbon monoxide detectors.
• Clear emergency contacts and posted evacuation instructions.
• First-aid kits in all residences.

---

7. Secure Payments and Records

All guest payments and ID submissions are processed through encrypted online portals:

• Bookings: book.staywithjay.com
• Payments: Managed securely within verified systems (Hospitable, WPForms, Stripe).
• Sensitive data (IDs, forms) are not stored locally beyond verification purposes.

---

8. Respect & Community Standards

StayWithJay abides by Airbnb’s nondiscrimination, accessibility, and anti-harassment standards, ensuring all guests and staff are treated with fairness and professionalism.

---

9. Operational Safety & On-Site Hosts

In multi-unit properties, a live-in host or co-host may reside in a separate, private suite.
They:

• Monitor shared areas for compliance.
• Provide assistance in emergencies.
• Maintain daily cleanliness and enforce quiet hours.

---

10. Summary Message for Landing Page

Safety at StayWithJay means:

“Every guest is verified, every space is inspected, and every stay is managed with care.
From contactless check-ins to strict hygiene standards, we make sure your visit is comfortable, secure, and stress-free.”

---

11. Emergency Contact Protocol

In any life-threatening or medical emergency, your first call must always be 911 (or your local emergency number).
Your StayWithJay host or co-host should be your second call, once you are safe and emergency services have been contacted.

Each residence provides a clear Emergency Contact Card, digitally and physically posted, which includes:

• 🚨 Emergency Services (Police, Fire, Medical): 911
• 🏥 Nearest Hospital or Urgent Care (auto-generated based on property address)
• 👤 On-Site Host / Co-Host Contact
• 🔧 Maintenance & Safety Hotline (StayWithJay): 440-941-0668
• 📞 Urgent & After-Hours Support: 216-513-6776

Guests are reminded that the StayWithJay team is available for property-related emergencies only, not life-threatening ones. Always contact emergency services first.